We deliver a complete auto services program to you at your business or your home.

Compression test, engine diagnosis, fuel pressure, spark, backpressure, electrical diagnosis.

Any antitheft lockout or electrical problems corrected. Find the problem & get your car running again! If necessary, mechanic will determine what parts are needed. Diagnose internal engine condition

Replace timing belt/chain, adjust proper tension and any necessary worn belts, pulleys, tensioner, cam seals, crank seal, tensioner spring, tensioner bolt. Water pump also recommended if integral. Check for proper idle and acceleration.

Replace pressure plate, throw out bearing and inspect flywheel and ring gear teeth. Align clutch. If necessary, resurface flywheel/replace. Inspect hydraulic system and/or mechanical linkage to assure proper operation while checking for loose/improper connections and leaks. Road test the vehicle.

Inspect front and rear components. Check wear with specifications. Bleed system of air and old brake fluid. Install proper components, lubricate necessary parts with high temperature grease, check wheel bearing play. Road test the vehicle checking for proper brake operation.

Check gasket and compression. Drain coolant and engine oil, replace both. Remove head, pressure test head and resurface deck. Measure for warpage. If excessive warpage occurs, resurface block and head/or replace engine. If ok for service, with all new gaskets, reassemble top end, with new head bolts. Torque bolts to specification and reassemble engine. Run car, check for proper temperature.

Check for leaks and overheating. Pressure test system. Assure thermostat opening and closing properly. Replace parts as necessary. Flush entire system. Replace all hoses and clamps with stress cracks/leaks. Pour new coolant mix 50/50 coolant and distilled water. Bleed air from system.

Check for starter/alternator issues. Alternator: check if charging properly. Starter: check for start and voltage draw test.

Have an issue or a noise with your vehicle and unsure as to what it is? Proper diagnosis is absolutely crucial to finding what exactly is wrong and fixing the right problem to prevent wasteful spending and chasing hear-say around one of your most important possessions. Check engine light and excessive noises often suggest that something is not okay with the vehicle. Find out what is wrong, with 100% confidence so that you will be able to make an educated decision on the next service or plan for your vehicle.

If your power door and window components are not working as you want them to, diagnosing internal parts of the door will point to what needs to be replaced. Windows can loosen from frames and small motors can fail. After installation, check for standard operation.

You will be happy hiring a professional on these jobs especially, to be confident that everything is installed properly with no abuse to sensitive components like sensors, engine harness, air injection and other computer monitored parts.

Anything that can break on your car, ultimately can and will need repair. Any noise, issue, vibration, service schedule, simple up-keep or other repairs should be addressed before they turn into bigger problems. 30/60/90k service, major and minor tune ups, general car care…etc.

Test fuel pressure in lines, test for power in relay circuit and fuse, check for leaks, Replace fuel pump if not operating. Leak detection: inspect source of leak and replace lines/clamps/seal & O rings as necessary. Fuel injection service is a 3 part cleaning, clean throttle body, intake manifold/injectors and fuel lines from tank to engine.

Clean off engine and compartment. With light, check for source of leak. Repair seals that are ruptured or seeping through. Run car, watch for additional leaks.